Codex Œnologique International

Download document

5-(HYDROXYMETHYL)FURFURAL - DOSAGE

COEI-2-HMF Determination of 5-(hydroxymethyl) furfural

  1. Principle

The 5-(hydroxymethyl)furfural (HMF) is determined by HPLC (sharing liquid chromatography in reverse phase).

  1. Apparatus and solutions

2.1.    Instrumental parameters (for example)

  • Chromatograph in liquid phase
  • UV/visible detector
  • column: octadecyl type grafted silica (C18), (length: 20 cm; internal diameter: 4.6 mm; granulometry of phase: 5 μm)
  • mobile phase: ultra filtered demineralised water - methanol - acetic acid (80, 10, 3: v/v/v)
  • flow: 0.5 ml/mn
  • detection wave length: 280 nm
  • injected volume: 20 μl
    1.     Preparation of calibration solutions

Solution HMF at 20 mg/l:

  • In a 100 ml graduated flask, introduce 20 mg of HMF weighed within 0.1 mg and complete to the graduated line with ultra filtered demineralised water,
  • introduce 10 ml of this solution in a 100ml graduated flask and complete with ultra filtered demineralised water;
  • the solution HMF at 20 mg/l is to be prepared each day.
  1. Preparation of samples

The samples and the calibration solution HMF are injected after filtration on a 0.45 μm membrane.

  1. Procedure

The chromatographic column is stabilised with the mobile phase for about 30 min.

Calculate the concentration of HMF of the sample from the peak surfaces.